Re: Water pump for 251 IND engine


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Vaughn [172.69.140.162] on Thursday, October 22, 2026 at 11:27:56 :

In Reply to: Re: Water pump for 251 IND engine posted by CB [172.70.111.98] on Thursday, October 22, 2026 at 09:51:30 :

At this link, you'll see the elbow you'll need on page 1 and page 3 has the pump. Bolt pattern on the pump will match yours as there are only two types made, the one you have and a 4 bolt round one. The top of the pump may differ either using the elbow or pipe. My recommendation would be use the pump that uses the elbow. You may have to buy a new WC 3/4 ton water outlet housing, not sure it would line up to that makeshift housing. Take your pump off and compare it to the NAPA pump, if the top outlet is bigger, then you are going to need go with the parts at the link as those are no longer available.

Your engine is got some years on it and the other item I would suggest you look at is the water distributor tube that is in the block behind the pump. These have a tendency to rust out and they provide cooling to the exhaust valve seats. It's a little work, you'll have to take your radiator off to get to it since it's almost as long as the engine, but well worth the effort to keep your engine in good shape. Here is the link to it
https://shop.midwestmilitary.com/product/water-distribution-tube/





Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button