Posted by clueless [104.22.55.141] on Thursday, October 08, 2026 at 13:21:20 :
In Reply to: Re: Turbo Flathead posted by Greg Coffin [172.70.176.20] on Thursday, October 08, 2026 at 12:53:48 :

low boost 265 flat head motor with hydraulic lifters better breathing etc. in one hour for the local and xport markets!!!!
.
Bill of Materials (BOM) — Turnkey Propane Base Engine
This is a scannable preliminary BOM for your modernized, naturally aspirated or mildly boosted 25-inch industrial propane engine [filegen-via-code].
Category Component Description Sourcing / Manufacturing Method Est. Cost (USD/Unit)
Block Assembly 25-Inch Cast Iron Block (Modernized Ports) Custom Sand-Cast (Costa Rica Foundry) $1,200 - $1,600
Valvetrain Gen I Small Block Chevy Hydraulic Lifters (x12) Off-The-Shelf (Sourced Wholesale) $60 - $120
Valvetrain Heavy-Duty Stainless Steel Valves & Springs (x12) Off-The-Shelf (Modern Truck Application) $150 - $250
Crankshaft Custom 4340 Billet Steel Crankshaft (265 Specs) Custom CNC (Billet Steel - Batch Sourced) $1,500 - $2,000
Rotating Assembly Heavy-Duty Connecting Rods (265 Spec) Sourced Forged Steel H-Beam or Stock Rec. $300 - $500
Rotating Assembly Custom Pistons (Engineered for Propane/Heat) Custom Forged Aluminum (e.g., Wiseco/JE) $600 - $800
Rotating Assembly Main & Rod Bearings, Rings, Gaskets Off-The-Shelf (Standard Interchangeable) $150 - $250
Fuel / Induction Propane Throttle Body Injection (TBI) Kit + ECU Off-The-Shelf Industrial (e.g., Holley/Impco) $1,200 - $1,800
Cylinder Head Simplified Flathead Deck (Iron or Thick Billet) Machined Locally / Cast with Block $300 - $500
Total Estimated Material Cost Per Unit: $5,460 - $8,020
lololol
Follow Ups: