Posted by Keith in Washington [162.158.41.187] on Sunday, February 15, 2026 at 15:59:12 :
In Reply to: Re: Differential Tooth Pattern - Prussian Blue posted by Glenn [172.70.230.127] on Sunday, February 15, 2026 at 10:25:31 :
I hope you used the original spacer behind the pinion bearing as a starting point. That spacer, if original, fits the original individual machining on the pinion bearing surface in the pumpkin. That puts the pinion bearing in the correct place. That is assuming that the pinion's bearing surface and teeth are machined to specs. there should no wear on the spacer as it is not subject to any rotation wear.