Posted by Glenn [172.70.230.127] on Sunday, February 15, 2026 at 10:25:31 :
In Reply to: Differential Tooth Pattern posted by Glenn [172.70.230.126] on Sunday, February 15, 2026 at 08:03:17 :
Drive Pattern with pressure
https://photos.app.goo.gl/fThrvQWCTXUPf5s76
Coast Pattern with pressure
https://photos.app.goo.gl/fzgE3dw659VUS2Fv9
Based on this I think i need to move the ring gear closer to the pinion and/or move the pinion away from the ring gear.
Right now i have the backlash at 0.010
My plan would be to first decrease the backlash to 0.008 and re-do the tooth pattern
If this doesn't work I believe i need to change the spacer on the pinion. Right now I have a 0.185 spacer so I would decrease to 0.183. Then reset the carrier and redo the tooth pattern
Does this sound correct?
Thanks
Glenn
Follow Ups: