Posted by Vaughn [172.69.135.72] on Saturday, June 14, 2025 at 11:40:49 :
In Reply to: Re: Shock Bushing Washers posted by Kevin [162.158.62.124] on Saturday, June 14, 2025 at 10:46:38 :
I'm not sure, the WM300/M601 use 16 of one type washer. Both the earlier PW models and later WM300 use the same stud anchor pin for the shock, but different shocks. Both earlier and later use the same rubber bushings so I don't see any reason these couldn't be used as long as your using the NAPA shocks for the earlier models. Tim may be able to advise on this as well. Thanks Kevin!
WM300 Retainer (16) C-930050