Posted by Vaughn [172.69.23.28] on Tuesday, May 13, 2025 at 19:20:22 :
In Reply to: Re: 53 PW rear springs posted by Kurt Wentorf [172.69.58.247] on Tuesday, May 13, 2025 at 08:17:52 :
Most chassis parts are fairly rusty and require a little patients and working them back and forth before you can get them off. You can use the same tool if it is a fully threaded bolt, use a piece of pipe 2" inches long a little bigger than the bushing and washers/nut on on the end opposite the head and pull them out, they generally come out fairly easy. Careful heating parts, most have some hardness to them, you don't want to soften the metal.