Posted by Vaughn [172.69.140.148] on Friday, April 26, 2024 at 13:33:46 :
In Reply to: Re: Stuck valve posted by David Sherman [172.68.22.246] on Thursday, April 25, 2024 at 23:51:33 :
I don't recommend use use the old gasket, once you crush the copper especially around the cylinders, it doesn't bounce back and your not going to get the gasket in the exact spot as before. Even though it may not be evident, it will leak and eventually fail. You're better offer installing a new one.. Also before you install the head, blow it out the water holes well get get out loose rust so it won't fall between the head and gasket. If the snow cat has a water hump head, this is the gasket kit.