Posted by Vaughn [172.69.140.186] on Saturday, April 27, 2024 at 18:42:48 :
In Reply to: Re: Chevy Conversion - Water Pump High Rise Installed posted by Greg Coffin [172.68.3.70] on Saturday, April 27, 2024 at 16:29:00 :
Nothing adjustable other than the engine. I set the engine 1 inch to the right and the bell housing 1 inch below the trans tunnel end and then angled the engine until the carb mount was level. Interesting how it worked out. I was facing using a smaller fan due to the one in the image gently swiping the lower radiator outlet and cutting the shroud to lower it. Then I thought if there was something available that might work so I did the internet search and found the high rise for SBC, did a markup using the std pump to see how it might work, and it looked like it would, so I bought one and as dumb luck would have it, it all worked out. Nice thing about Chevy's engines they have crazy things available due to the hot rod crowd. There is really nothing out there to guide you on doing a Chevy conversion, it would have helped.
Follow Ups: